Keunggulan Produk
Flame Photometry is the technique of choice for the measurement of Sodium, Potassium and Calcium in all sample types in: Mineral Extraction, Oil Industry, Paper Industry, Pharmaceuticals, Soil Analysis, Utilities, Food & Beverage, Chemical Manufacture and Fertilisers. The Model 410 Industrial Flame Photometer with digital output, for printer or PC connection, also has Sodium linearisation capability to allow higher concentrations of Sodium (to 20 ppm) to be directly measured using a single point calibration. That facility can be switched on or off according to the operator’s preference or protocol for Sodium determinations. The Model 410 Industrial Flame Photometer has Sodium, Potassium and Calcium specific filters and NIST traceable 1000 ppm standard concentrates for each of those analytes (6 x 100 ml).
Range displayed
Na 0 – 1999
K 0 – 1999
Ca 0 – 1999
SPECIFICITY
Na, K & Li Interference is < 0.5% value of element under analysis
Reproducibility
(K=10ppm 20 aliquots from single sample)
< 1.5%
Aspiration rate
3-6 ml/min
Speed of analysis
Time to stability 15 seconds
Data output
Analogue: Voltage 0.20 Volts FSD
Spesifikasi
| Berat | 3 kg |
| Lain-lain |
|
| Dimensi | 68 x 58 x 77 cm |