MITECH MFD350B Ultrasonic Flaw Detector

87500000.0 IDR Rp 87.500.000 0% Rp 87.500.000
Harga sudah termasuk PPN

Rp 78.828.829 Termasuk PPN

Not Available For Sale

Mulai dari Rp 7.517.182/bulan. Lihat cicilan lainnya
Siap dikirim 2-5 hari
  • Merek
  • Lokasi

Variant ini tidak tersedia.

Total Rp 87.500.000
Anda sudah mencapai maksimal pembelian
Informasi Toko
Dijual dan dikirim oleh Bhinneka, DKI Jakarta
1 Year Local Official Distributor Warranty

Syarat dan Ketentuan
Jaminan 30-hari uang-kembali
Pengiriman: 2-3 Hari Kerja

  • Measuring Range: (0 ~ 6000) mm at steel velocity
  • Material Velocity: (1000~ 9999) m / s
  • Dynamic Range: ≥ 36dB, Resolution: > 40dB (5P14)
  • Display Resolution: (320×240 pixels) multi-color TFT LCD
  • Protection Level: IP54
  • Unit Utama
  • Spesifikasi
    • Display Resolution: (320×240 pixels) multi-color TFT LCD
    • Blind Area: 5 mm
    • DAC/AVG: Y
    • Protection Level: IP54
    • Communication Interface: High Speed USB2.0 port
    • DataPro Software: Y
    • Measuring Range: (0 ~ 6000) mm at steel velocity
    • Bandwidth: 0.5 to 10MHz automatic matching according to the probe frequency
    • Material Velocity: (1000~ 9999) m / s
    • Dynamic Range: ≥ 36dB
    • Vertical Linear Deviation: ≤ 3.0%
    • Horizontal Linear Deviation: ≤ 0.2%
    • Resolution: > 40dB (5P14)
    • Sensitivity Leavings: >60dB (flat-bottomed deep hole 200mmФ2)
    • Rejection: (0 to 80)% Linear without affecting the linearity and gain
    • Noise Level: ≤ 10%
    • Probe Type: straight beam probe, angle beam probe, dual element probe, through-transmit probe
    • Alarm: Beep Alarm and LED light Alarm
    • Power Supply: DC 9V
    • Working Time: > 8 hours
    • Overall Dimensions: 263 × 170 × 61(mm)
    • Operating Temperature: (-10 ~ 50) c
    • Relative Humidity: (20 ~ 95)% RH
    • Pulse Energy: Low, Medium and High spike pulse selectable, suitable for various probe
    • Pulse Width: (0~99.99)µs range with continuous adjustment to match the different frequency probes
    • Probe Damping: 100Ω, 200Ω, 400Ω selectable to meet different requirements for resolution and sensitivity
    • Sampling: 10 digits AD Converter at the sampling speed of 160MHz, waveform of highly fidelity.
    • Gate Reading: optional for single gate and double gate reading mode, both peak and edge can trigger it
    • Gain: 0 dB to 110 dB adjustable in selectable steps 0.1 dB, 1 dB, 2dB and 6dB
    • Transducer Connections: BNC or LEMO
    • Flaw Sizing: Automatic flaw sizing using AVG/AVG or DAC, speeds reporting of defect acceptance or rejection
    • Weld Figure Feature: Weld Figure feature can be enabled when detecting the weld parts using angle transducer
    • Auto-Calibration: Automated calibration of transducer zero offset and/or material velocity
    • Flaw Locating: Live display Sound-path, Projection (surface distance), Depth, Amplitude
    • Defect Quantification: directly display the result with db unit
    • Defect characterization: calculate the equivalent size of the flaw easily and quickly to facilitate the judgment of artificia
    • Curved Surface Correction: used to measure the surface distance and depth of defect on a curved surface
    • Crack Height Measuring: measure and display the height of a crack found inside the workpiece
    • Magnify Gate: spreading of the gate range over the entire screen width
    • A Scan Freeze: Display freeze holds waveform and sound path data
    • Coded Echo Color: locate the flaw position
    • B-Scan: display a graphical cross-section of the workpiece
    • Power-Saving Method: low power consumption
    • Gates: Wave-getting Gate, Wave-losing Gate, Single Gate Reading, Dual Gate
    • Rectification: Positive half wave, negative half wave, full wave, RF
    LayarLCD Display