Wireless Slave TTL Functionality, Runs on 4 AA Batteries
Unit Utama
Spesifikasi
Swivel Head
270°
Guide Number at ISO 100
145ft / 44m at 105mm
Weight
314.97 g
Dimensions (W x H x D)
73.7 x 134.6 x 104.1 mm
Zoom Head
Full frame: 24 mm - 105 mm
Recycle Time
approx 5s (AA alkaline cell used)
Power Source
4 x AA Batteries
Garansi
12 Bulan dari Distributor Resmi di Indonesia
Others
Vari-Power : 1/1 to 1/32 (Manual)
Coverage : 16 - 105 mm (Full Frame)
Off-Camera Terminal : 3.5 mm, PC
Flash Duration : 1/800 to 1/20000 sec
Flash-Ready Indicator
Compensation : -3 EV to +3 EV (in 1/3 EV steps)
Slave Timing Modes : Instant Sync; Skip Preflash
Wireless Communication : 1 Channels
Wireless Groups : 1 Groups
Bounce Head
0° to +90°
Features
Compatible with Nikon iTTL
Zoom Range: 24-105mm (16mm with Panel)
Tilts Upward 90
Allows for -1.5 to +1.5 EV compensation in half-stop increments
A "My TTL" setting allows for adjustment of the TTL exposure level from -0.75 to +0.75 in 0.25-step increments
Compatible with in-camera exposure lock
Flash can also be synchronized to pre-flash and traditional wireless systems
Rear curtain synchronization and red eye reduction is possible when used in conjunction with capable cameras
An AF-assist light will provide accurate focusing in low light
The Di600 features a recycle time of approximately 5 seconds
PC and 3.5mm sync ports available for compatibility with various lighting equipment
Energy saving system places the unit in sleep mode after 5 minutes without use and will automatically power off the unit after 60 minutes. This system is cancelled while in slave mode